DOUBLE FALL ARREST BLOCK / INERTIA REEL / RETRACTABLE TYPE FALL ARRESTER
Model No : 41 HWDB 2
Brand : IKAR
IKAR retractable type fall arresters are manufactured and tested in accordance with EN360:2002, they are produced for maximum durability, using outstanding technology for the demanding conditions of the workplace. All of the components important for the device functioning are made from rustproof material, aluminium or stainless steel and shockproof plastic. This sturdy method of construction ensure that IKAR fall arrest devices are always reliable in use and have low maintenance requirements.
The IKAR retractable type fall arresters function in a similar way to a car seat belt. A re-coiling main spring keeps the galvanised steel cable or polyamide webbing with a dyneema core lifeline (depending on the model) in light tension, allowing it to respond immediately in the event of a fall, without a slack lifeline.
If the extraction speed of the lifeline exceeds 0.5 m/sec, one of the catches which activate the brake system will lock into place as a result of centrifugal forces in the rotating drum. The arrest force absorption required for the retractable type fall arresters is achieved via a new type of brake system (disk brake) which can only be set from the inside.
IKAR retractable type fall arresters can be used in a number of differing industry sectors involving a potential fall hazard. We aim to provide solutions for safety relevant and problematic work areas.
Connector : IKV 21 according to EN 360:2002
Housing : aluminium
Lifeline : Webbing
Sturdy, low-maintenance, double height safety device with webbing lifeline, for 1 person. The lifeline 2 x 2 m incorporates a sewn fall indicator. Lightweight aluminium housing with a rotational attachment eye. Swivel double action hooks IKV 21 with a gate opening of 24 mm, alternatively large swivel double action hooks IKV 32 W with a gate opening of 60 mm on the end of each lifeline.
- Lightweight aluminium housing with a webbing lifeline
- Swivel eye harness attachment point
- Sewn in load indicator on lifelines
- Additional testing, for against falls over edges
- Aluminium twist lock karabiners on end of lifelines to EN362
- Designed for the block to be attached to the safety harness