DENSO VOID FILLER – INJECTABLE PETROLATUM COMPOUND
Denso Void Filler is a petrolatum compound specially formulated for hot injection into voids. The compound is based entirely on petroleum hydrocarbons with additives to displace water, inhibit corrosion, enhance adhesion and control flow.
Denso Void Filler is pumped into the voids occurring between pipes, cables, ducts and protective sleeves to exclude air and water. It is generally pumped warm and sets to a semi-solid paste to provide corrosion protection of the steel.
- Excellent flexibility
- Penetrates and wets existing corrosion
- Can be pumped
- Unaffected by water, acids or salts
- Can be supplied in large quantities.
The void filler is heated between 176°F to 248°F (80°C to 120°C) and pumped into the lowest point until it exits the highest point in a continuous stream at about 158°F (70°C). For full long term corrosion protection it is essential to completely fill all voids between strands and ducts to exclude all air and water. Designs shall allow for expansion and contraction due to temperature change without creating pressure in the ducts.
Specific Gravity at 77°F
Specific Gravity at 176°F
Drop Point (IP 132 / ASTM D566)
Congealing Point (IP 76 / ASTM D938)
Unworked Cone Penetration at 77°F
(per IP 179 / ASTM D937)
Unworked Cone Penetration at 32°F
Worked Cone Penetration at 77°F
Brookfield Viscosity at 68°F (20°C)
Brookfield Viscosity at 104°F (40°C)
Brookfield Viscosity at 140°F (60°C)
Brookfield Viscosity at 176°F (80°C)
Brookfield Viscosity at 194°F (90°C)
0.90 – 0.93
0.90 – 0.93
- 12 oz cartridge
- 5 gallon pail
- 55 gallon drum