DENSO ACRYLIC TOPCOAT
Denso Acrylic Topcoat is a component of the Steelcoat 400 and 500 Systems for protection of above ground steelwork. It is a tough light stable coating which is applied as the topcoat over Denso Acrylic Tape and Denso Ultraseal Tape. Single pack waterborne synthetic copolymer coating producing a tough weather and u.v. resistant coating. Available in a range of colours.
An integral component in various Denso coating systems as a topcoat finish.
• Accommodates some vibration and movement of substrate
• Resistant to mineral acids, alkalis and salts
• Will adhere and remain attached to acrylic backed tapes
Ensure the substrate is prepared as per directed by the proposed coating system.
Thoroughly stir the paint in its container to ensure uniformity prior to use. Apply by brush, roller or
Do not apply when ambient temperature is below 10 degree Celcius or when relative humidity exceeds 90%. Allow a dwell time of 2 hours at 20 degree Celcius before attempting to recoat. Coating is usually touch dry in 30 minutes. Expected consumption rate is 3.0 sq.m/L.